Description
Characteristics:
DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.
Areas of Application:
DINITROL RC 900 has been developed for use on oxidised iron parts.
Method of Use:
Remove rust, grease and dirt with a wire brush, sand paper or a sandblasting process. Rust and scale may only be visible as slight shading. In addition to rust, the steel must also be free from dust and grease. Carefully clean with acetone or lacquer thinner. Shake the spray can well. The product should be applied in several successive coats, at a distance of approx. 25 cm. The metal temperature should not be below 10°C. The material is dust-dry after one hour; if necessary, a further coat can be applied.
Technical data:
Colour: amber-coloured solution
Film type: hard
Density: 0.9 g/cm³
Viscosity: ~ 118 cm centistokes
Solids: 16%
Empfohlene Schichtstärke: 130 µm
Yield: ~ 60 g/m² per coat
Drying time: 24 hours at 20°C
Storage time: 18 months (between 15°C and 25°C)
